Sunco Inc.
P.O. Box 77926 | Charlotte, NC 28271
Phone:  (704) 545-3922| Fax:   (704) 285-0488

Email:   info@suncovalves.com

Questions?

(704) 545-3922

© 2024 Sunco Powder Systems, Inc.

Home
About Sunco
Contact Us
Rotary Valves | Drop-Through Valve| Dust Collector Valve| Blow-Through Valve |Offset Valve |Rectangular Valve | Sanitary Valve | USDA Valve
Diverter Valves |Conveying Diverter | Gravity Diverter |Plug Diverter
Double Dump Valves
Gate Valves | Knife Gate Valves | Slide Gate Valves | Check Valves
Blowers | Eurus Blowers | Blower Packages | Remanufactured/Large Blowers
Sitemap

The Sunco Dust Collector Valve is a low-cost solution designed for light duty dust collector applications. This valve offers a tremendous cost savings over our heavy duty series.  

To keep costs low, the Dust Collector Valve is only available in the configurations listed below.   It is also designed for maximum temperatures of 150° F and pressure differentials of 4 psi or less.

Construction & Specifications

Sizes:                     

6", 8", 10" and 12"

Body:                

Cast Iron

End Covers:        

Cast Iron

Rotor:                   

Fabricated Mild Steel with Closed-Ends and Fixed Tips

Bearings:             

Sealed for Life, Mounted Outboard
Shaft Seal:           

Nitrile Lip Gland
Drive:                    

Direct Drive, 230/460V/3Ph/60Hz, TEFC

1/2 HP @ 29 RPM (6" and 8")

3/4 HP @ 26 RPM (10" and 12")
Flanges:               

Round or Square
Max. Temp:        

150 deg.° F.
Max. Pressure:  

4 PSI Differential

Dust Collector Valves are typically stock and can ship within 24 hours. 

If your max temp is greater than 150F and/or max pressure differential is greater than 4 PSI, please see our Standard Rotary Valve Series